Barricade tape is brightly colored tape (often incorporating a -tone pattern of alternating yellow-black or red-white stripes or the words “Warning” or “Hazard” in prominent lettering) that’s used to warn or be a focus for passersby of an space or state of affairs containing a doable hazard. It acts as a minor obstacle to forestall accidental entrance to that space or situation and because of this enhances normal safety. Barricade tape can be known as development tape or barrier tape or in reference to the safety hazard involved as caution tape, warning tape, hazard tape or hazard tape. When used by a police force, the tape is named police tape.
The tape is usually wrapped and affixed as a visible warning sign and demarcation, for example towards coming into a dangerous space, equivalent to an industrial or commercial building site, a roadworks development site or the scene of an accident[1] or against the law (for crime scene preservation), or towards handling inoperative machinery or appliances.
Barricade tape is made with durable, resilient, tear-proof plastic materials such as polyethylene, polypropylene, or nylon. It is a minimum of 2 mm thick and 3 inches wide.[citation needed] However, completely different producers provide totally different sizes and thicknesses of barricade tape. Other widespread sizes of barricade tape are 2, 4 or 6 inches wide and four or 10 mm thick.[citation needed]
Barricade tape usually has a vivid background and pre-printed bold warning text. It is usually doable to purchase plain barricade tape and write a customized message on it. However, care needs to be taken when utilizing custom tape, as barricade tape designs may be required to comply with laws, such as the Occupational Safety and Health Administration (OSHA) and American National Standards Institute (ANSI) laws (when used for purposes topic to regulation by these organizations) in the USA.
Barricade tape is used in keeping with the colour specs set by OSHA and ANSI. Barricade tape may be use primarily as a safety precaution for varied industries and procedures.
Development tape
This is used in construction zones to inform folks about ongoing construction and that there are possible hazards within the demarcated area. Construction tape often employs a yellow-black colour combination and incorporates printed textual content, equivalent to “Under Building”, “Caution”, “Work Zone”, and “Maintain Out” (among others). This type of barrier tape is commonly found on the site of renovations, demolition, and minor repairs.
Hazard tape
This is used in areas containing a considerable danger. Examples embrace electrocution hazards or areas within which there’s a risk of publicity to toxic chemicals. In some regions, the particular coloration combination signifies the type of threat. For example, yellow-black tape may be used to signal the presence of a physical hazard (e.g., a hole), while magenta-yellow can denote a radiation hazard. This type of barrier tape is commonly utilized in laboratories, production areas, and industrial zones.
Traffic control device tape
This type of barrier tape, as its name implies is used to manage visitors, whether or not foot traffic or vehicle traffic. Traffic management system tapes are used as short-term visitors signal to redirect traffic during parade or each time a road is closed. These are often brightly colored, either in strong orange or orange-white combination.
Police tape or law enforcement tape
This type of barrier tape is used to isolate, protect and protect a criminal offense scene. Police tape is used to inform the public that an investigation is on going and that a specific space is restricted. This is normally seen with a yellow-white, yellow-black or blue-white coloration combination.
Firefighter tape
This serves the same goal as police tape and hazard tape. Firefighter tape is used to isolate a specific area throughout or after a fire to maintain the general public away from fire-associated risks (e.g., smoke inhalation, airborne particulate matter, and damaged buildings).
Requirements for barricade tape
OSHA and ANSI provide exact specification for barricade tape colors. These are present in OSHA laws 1910.22 and 1910.one hundred forty four[citation needed] and ANSI Z535.5-2007, Safety Tags and Barricade Tapes (for Temporary Hazards). Nonetheless, the dimension, thickness, and materials of the barricade tape are left to the discretion of the manufacturer.
OSHA-specified barricade tape colors
Red / white for Fire Prevention and Protection Equipment.
Black / white for Housekeeping and Aisle Marking
Magenta / yellow for Radiation Hazards
Green / white for Safety and First Aid
Blue / white for Faulty Machinery
Orange / white for Traffic and Caution Warning
Black / yellow for Physical Hazards
ANSI-specified barricade tape colors
Yellow/Black Barricade Tape serves as CAUTION and POTENTIAL HAZARD from:
Excavation less than 1.2 meters (four toes) in depth
Identification of trip hazards and low hanging objects
Material storage on site
Red Barrication Tape indicates DANGER and SERIOUS HAZARD from:
Overhead work
Live electrical components
Scaffold under building
Around swing radius of equipment with a rotating superstructure
Magenta (Purple)/Yellow Tape denotes DANGER and POSSIBLE RADIATION EXPOSURE
Underground warning tape (customized) warns about:
Digging underground gas-pipeline, electrical cable and OFC cable set up
Customized thickness and width are available
Underground work
Protection from overground work
United Kingdom
Red and white tape (high) or yellow and black tape (bottom) can both be used to mark hazards under UK health and safety rules
Health and safety rules state that markings needs to be positioned round obstacles or harmful locations. This includes the place any of the following present a risk:
folks tripping or falling
objects falling
people or vehicles colliding with objects
These markings must be made up of alternating red and white or yellow and black stripes of equal size at a 45 degree angle. Barricade tape can be used to fulfill this requirement as long as the tape fits these requirements and is “commensurate with the scale of the obstacle or harmful location in question”.
If you loved this post and you would certainly like to get additional details regarding police barrier tape kindly go to our own web page.